i recently put 300ex shocks and a hl lift kit on the front of my 300 now its really tall in the front and looks funny cuz the rear doesnt match does anyone know of an easy way 2 make a shock bracket for thr rear all i need it 2 b is about 2inches thanks
You will break the rear u-joint and probably bend the output shaft. Strech the swing arm some and you should be ok in the rear. How much gc do you have in the front?
them 300 and 450s are tanks but without streching your a arms and swing arm some pond is right you could break stuff on the front you could break your front diff and on the rear you could get your u joint
__________________
98 Foreman 450 DGL 14% GR 475BBK Snorkle S-I-G Mod HL Springs Jetted Uni Filter Glass Pack Relocated Fan/Oil Cooler 28" SilverBacks on SS112's Coming 35% GR 30's or 32's Backs A Big IRS Lift
but if your low on money or dont know how to build new arms or swing arm then start small add a little and ride and see how it goes then if it does ok and if you want to add a little more you can but dont do it all at once. Im not sure if this will work cause its been a long time since i have been around a 300 you might could run foreman 450 a arms and maybe the 450 swing arm with some mod since the 450 run two shocks to get the lift your looking for. but you could build a small lift for the back and run a 1 or 1 1/2 spring spacer to pick it up some in the back. i hope this helps
-- Edited by Badforeman475 on Saturday 29th of August 2009 09:55:05 AM
__________________
98 Foreman 450 DGL 14% GR 475BBK Snorkle S-I-G Mod HL Springs Jetted Uni Filter Glass Pack Relocated Fan/Oil Cooler 28" SilverBacks on SS112's Coming 35% GR 30's or 32's Backs A Big IRS Lift
what size pipe would u recomend for the spring spacer and what would b a easy way 2 make it im just know getting into doing this custom stuff tired of paying 100 bucks for little brackets
