PH Customz

honda maniac · Veteran Member

450 axel paddles

gordon fabrications · Senior Member

you can make them out of 6in pipe that will bolt on the hub and slide over the axle tube. It works pretty good and you don't have to take any parts off and its easy to take on and off.

honda maniac · Veteran Member

that sounds good i want to weld them to the hubs i think and weld angl iron on them and relocat 1 shock right over the trailer hitch but need help and pics

gordon fabrications · Senior Member

you don't need help all you need is some imagination, a torch, and welder.

honda maniac · Veteran Member

yea okay any pics

gordon fabrications · Senior Member

I don't know anybody that has welded it to the hub so i can't produce any pictures of that.

Badforeman475 · Delta Custom Atv's

honda maniac · Veteran Member

yea thanks i want to do exactly what you have in that pic but only make the pipe longer and closer to the center of the bike and relocate the shocks to 1 shock right behind the trailer hitch

Badforeman475 · Delta Custom Atv's

If you move it in more it will tare your muffler up.

honda maniac · Veteran Member

na manit will have pleatyof clearence and this is what im thinking i edited it with paint ignore the light gray https://i840.photobucket.com/albums/zz321/420maniac/untitled.jpg

Badforeman475 · Delta Custom Atv's

Ok that might work I just think one shock on the rear want be enuff to hold up but I might be wrong

honda maniac · Veteran Member

yea well it holds the 420 and 300 upand i am putin a 2inch pipe spacer if not i will put both shocks in the center like that guy did i crossed his out

hondaspartan300 · Veteran Member

Wow that is the best looking axle paddle i have seen i definitly like it what is the true point of one being it is completely under water or is it to help you in bad ruts for more traction or sloppy mud? I would lime to know thanks.

CtownForeMan · Member

That picture is my foreman. I ended up running one single rhino shock in the rear. Its a litle stiff but works great. I actually walked out of a hole with one hand sitting down where a arctic cat with 29.5's had to have 2 people to help him out of the hole. Then found a bike with a 4 inch lift and 32's and they had to rock the bike to get out of it while I backed through the hole. We are just redesigning them to make them lighter and make it where they clean better.