PH Customz

Members Login
Username 
 
Password 
    Remember Me  
PH Customz -> PH Customz atv lifts and accessories -> ??? on tie rods ???
Post Info TOPIC: ??? on tie rods ???
rrsi_duke


Member

Status: Offline
Posts: 5
Date:
??? on tie rods ???
Permalink  

the lift and bike is running great           except when i get in a pinch the bike will throw a tire off line bad by turning the heim joint on the knuckle.   i got the biggest bolts i can get through there and tighten them as tight as i can but it will still turn on the knuckle.  is there any fixes for this or do i need to find some tie rod ends to replace the hiem joints so they will be press in the knuckle instead of just lying on top of the knuckle             please help



__________________
----------------------------------- Foreman 450 w/ a few goodies
Head Cutter


Pondhopper sucks balls!!!!!

Status: Offline
Posts: 198
Date:
Permalink  

Can't say that I have ever had that problem. Are you running 3/8" hardware?


__________________

pondhopper1


Headcutters DADDY

Status: Offline
Posts: 630
Date:
Permalink  

you can weld a 3/8 flat washer on the top and bottom of the knuckle where the stock tierod end would originally would go. Then put a 3/8 bolt through it.

__________________

07 shitty kitty
jgmood050


.

Status: Offline
Posts: 440
Date:
Permalink  

when you lock your hiem joints down do so in a manner that they oppose eachother
this will keep them from 'turning' or "flopping".

__________________
To each thier own....
Head Cutter


Pondhopper sucks balls!!!!!

Status: Offline
Posts: 198
Date:
Permalink  

jgmood050 wrote:

when you lock your hiem joints down do so in a manner that they oppose eachother
this will keep them from 'turning' or "flopping".





Wouldn't that restrict articulation of the heims? Resulting in large turning radius?

__________________

jgmood050


.

Status: Offline
Posts: 440
Date:
Permalink  

it can but i bend the pipe so that the hiem joints are almost flat and it seems to work the ole yeller and rabbits both turn good..

__________________
To each thier own....
rrsi_duke


Member

Status: Offline
Posts: 5
Date:
Permalink  

thanks fella's I won't get to work on it till this weekend but we'll get'er goin

__________________
----------------------------------- Foreman 450 w/ a few goodies
bigred720


Member

Status: Offline
Posts: 14
Date:
Permalink  

where do you guys get your hiem joints?
and are they already opposite of each other or do they have to be rethreaded?
also about how much do they cost?

__________________
05 Rincon blk/tan, 720 Big Bore kit, Hot Cam, BIG RED G. R., Swamp Series HMF pipe (with 12" extention), Duel Snorkel, Radiator relocation, 27" OUTLAWS, Highlifter springs, and audiopipe.

05 Rincon blk All Stock
jgmood050


.

Status: Offline
Posts: 440
Date:
Permalink  

1/2" right hand from summit racing @ $6.00 a piece

__________________
To each thier own....
Foreman500


Newbie

Status: Offline
Posts: 2
Date:
Permalink  

It might not be your time rods. My bike was doing the same thing and it was the nut that holds it on the steering stim kept backing off. I just put some lock tight and it's been good ever since 



__________________
BMF Foreman
fh8s78


Member

Status: Offline
Posts: 13
Date:
Permalink  

Before the final examination, Tom told his mother, "Mom, I had a dream last night that I'd passed today's exam."

www.aliexpress.com/store/product/kid-brand-taurababe-spring-autumn-baby-boy-tshirt-freeshipping/109717_931977074.html

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
PH Customz -> PH Customz atv lifts and accessories -> ??? on tie rods ???


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard